range repair light indicator lense cap

Step-By-Step Range Repair Manual

                                  WARNING                                   

REMOVE THE POWER FROM THE APPLIANCE BY EITHER REMOVING THE POWER CORD  OR KILLING THE POWER TO THE UNIT AT THE POWER BREAKER BOX BEFORE SERVINCING.       

The light lense will break off from the oven light indicator.This will give you a symptom of the element indicator light is not working .Remove the back screws to acces the back area of the oven or range.               

                                                                                                               

Electric Range Repair Video         APLLIANCE REPAIR

The picture on the left shows the light lense indicator.The picture on the right shows the light lense holder, it also shows part of the light lense broken off inside  the light holder remove it with a small screw driver.

Remove the old light lense by pushing it out of the rear panel.  Reinstall the new light lense by pushing in thrugh the front panel.The picture on the right shows the new light lense.                                                                           

Slide the light holder flushed up against the lense until it clips in to position ,reinstall back panel plug in the unit and test.     

Maytag slide in range oven will not work

Maytag oven range will not function, the display shows SAb.The SAb mode is the SABBATH mode for the oven.This is a function that can be set by mistake and it will not allow you to turn on the oven. To go back to the manufactures specs, hold down the clock pad for 3 seconds this will disable the SABBATH  mode.To activate the SABBATH mode hold down the clock pad for 3 seconds.Hope this helped someone .